לשיחה עם נציג
תפריט

    לפרטים נוספים עבור MC Injekt GL-95 TX נא מלאו את הטופס:

    • תיאור ותכונות

      • Low-viscosity, polymer-modified, acrylic-based hydro-structural resin
      • Short controllable reaction time
      • Highly flexible when cured
      • Good adhesion properties
      • Fulfils KTW-requirements of test group D1 (large area sealing)
    • שימושים

      • Sealing injection of joints, cracks and cavities in masonry and concrete
      • Sealing and bonding injection of contact areas between plastic sealing-strips and concrete
      • Supplementary exterior sealing of ground-connected structural parts through area-measured ground-gelling according to module 804.6102 of DB AG
      • Subsequent sealing by horizontal barrier and, where necessary, vertical barrier against rising moisture in masonry
      • REACh-assessed exposure scenarios: long-term water-contact, periodical inhalation, application
      • DIN EN 1504-5 classification: U (S2) W (1) (2/3/4) (1/40)
    • הכנת תשתית

      Before injection the structure’s cracks and voids have to be inspected according to technical standards and regulations, and an injection proposal is to be planned.

    • הכנת החומר

      MC-Injekt GL-95 TX is a multi-component injection system, consisting of component A (base) and component B (initiator solution), which are mixed from sub-components at the construction site.
      Component A is mixed from sub-components A1, A2 and A3. Component A2 is mixed into component A1 first, afterwards component A3 is added to the mixture A1/A2. Mixing is carried out using a wooden paddle. Component B is dissolved in component B1. The concentration of the solution determines the reaction time. Reaction times also depend on temperature.

    לפרטים נוספים עבור MC Injekt GL-95 TX נא מלאו את הטופס: