Prior to each application the injectivity of the rocks, building ground or structure must be checked and an injection concept is to be defined.
MC-Montan Injekt FF is a two-component, fastreacting injection resin that reacts with a defined
volume-increase to a solid closed-cell, waterproof and load-bearing hard foam.
Prior to each application the injectivity of the rocks, building ground or structure must be checked and an injection concept is to be defined.
Mixing of the components is carried out during application in the mixing-head of the 2-component injection pump (required mixing section: 20 cm grid mixers).
Injection is carried out using a 2-component injection pump with sufficient pressure and capacity (e.g. Perforator GX 45).
Injection of MC-Montan Injekt FF must be stopped if the temperature of the ground / structure drops below + 6 °C. The access of moisture to the resin components in opened containers is to be effectively prevented (e.g. by drying agents, drying tubes).